文献リスト

AIChE Journal     Vol. 60 (2014)

• A coupled population balance model and CFD approach for the simulation of mixing issues in lab-scale and industrial bioreactors
  Jérôme Morchain, Jean-Christophe Gabelle and Arnaud Cockx, 27–40
• Comparison of DEM results and Lagrangian experimental data for the flow and mixing of granules in a rotating drum
  Ebrahim Alizadeh, Francois Bertrand and Jamal Chaouki, 60–75
• Transfer of a nanoparticle product between different mixers using latent variable model inversion
  Emanuele Tomba, Natascia Meneghetti, Pierantonio Facco, Tereza Zelenková, Antonello A. Barresi, Daniele L. Marchisio, Fabrizio Bezzo and Massimiliano Barolo, 123–135
• Tomography images to analyze the deformation of the cavern in the continuous-flow mixing of non-Newtonian fluids
  Dineshkumar Patel, Farhad Ein-Mozaffari and Mehrab Mehrvar, 315–331
• Use of an areal distribution of mixing intensity to describe blending of non-newtonian fluids in a kenics KM static mixer using PLIF
  F. Alberini, M. J. H. Simmons, A. Ingram and E. H. Stitt, 332–342
• Analysis of the advection–diffusion mixing by the mapping method formalism in 3D open-flow devices
  Oleksandr Gorodetskyi, Michel F.M. Speetjens, Patrick D. Anderson and Massimiliano Giona, 387–407
• Investigation of flow parameters and efficiency of mixture separation on a structured packing
  Аleksandr Pavlenko, Vladimir Zhukov, Nikolay Pecherkin, Vladimir Chekhovich, Oleg Volodin, Alexey Shilkin and Christoph Grossmann, 690–705
• Dependence of shear and concentration on fouling in a membrane bioreactor with rotating membrane discs
  Mads K. Jørgensen, Malene T. Pedersen, Morten L. Christensen and Thomas R. Bentzen, 706–715
• LDA measurements and CFD simulations of an in-line high shear mixer with ultrafine teeth
  Shuangqing Xu, Qin Cheng, Wei Li and Jinli Zhang, 1143–1155
• Effect of mixer geometry and operating conditions on flow mixing of shear thinning fluids with yield stress
  Jaime Sossa-Echeverria and Fariborz Taghipour, 1156–1167
• Neutron radiography and numerical simulation of mixing behavior in a reactor for supercritical hydrothermal synthesis
  Ken-ichi Sugioka, Kyohei Ozawa, Takao Tsukada, Seiichi Takami, Tadafumi Adschiri, Katsumi Sugimoto, Nobuyuki Takenaka and Yasushi Saito, 1168–1175
• In situ characterization of floc morphology by image analysis in a turbulent Taylor–Couette reactor
  Mélody Vlieghe, Carole Coufort-Saudejaud, Christine Frances and Alain Liné, 2389–2403
• Intensification of fast exothermic reaction by gas agitation in a microchemical system
  Jisong Zhang, Kai Wang, Xiyan Lin, Yangcheng Lu and Guangsheng Luo, 2724–2730
• Gas–liquid mass-transfer properties in CO2 absorption system with ionic liquids
  Xin Zhang, Di Bao, Ying Huang, Haifeng Dong, Xiangping Zhang and Suojiang Zhang, 2929–2939
• Modeling of cavern formation in yield stress fluids in stirred tanks
  Qi Xiao, Ning Yang, Jiahua Zhu and Liejin Guo, 3057–3070
• Flow and temperature patterns in an inductively coupled plasma reactor: Experimental measurements and CFD simulations
  Sangeeta B. Punjabi, Sunil N. Sahasrabudhe, S. Ghorui, A. K. Das, Narendra K. Joshi, Dushyant C. Kothari, Arijit A. Ganguli and Jyeshtharaj B. Joshi, 3647–3664
• Mathematical modeling of the partial hydrogenation of vegetable oil in a monolithic stirrer reactor
  Diego E. Boldrini, Daniel E. Damiani and Gabriela M. Tonetto, 3524–3533
• Effect of impeller design and power consumption on crystal size distribution
  Chinmay V. Rane, Kalekudithi Ekambara, Jyeshtharaj B. Joshi and Doraiswami Ramkrishna, 3596–3613
• Natural Giesekus fluids: Shear and extensional behavior of food gum solutions in the semidilute regime
  Maria D. Torres, Bart Hallmark, D. Ian Wilson and Loic Hilliou, 3902–3915
• Orbitally shaken bioreactors—viscosity effects on flow characteristics
  Andrea Ducci and Weheliye Hashi Weheliye, 3951–3968
• Wet dispersion mechanism of fine aggregates in multiphase flow with solid beads under simple shear
  Daisuke Nishiura, Hide Sakaguchi and Atsuko Shimosaka,4076–4085

Canadian Journal of Chemical Engineering   Vol. 92 (2014)

• Influence of the second emulsification step during production of W/O/W multiple emulsions: Comparison of different methods to determine encapsulation efficiency in W/O/W emulsions
  Anna Schuch, Ayse Nur Tonay, Karsten Köhler and Heike P. Schuchmann, 203–209
• Parameter optimisation and validation for droplet population balances
  Hanin B. Jildeh, Menwer Attarakih, Matthias Mickler and Hans-Jörg Bart, 210–219
• Evaluation of breakage kernels for liquid–liquid systems: Solution of the population balance equation by the least-squares method
  Jannike Solsvik, Zsolt Borka, Per Julian Becker, Nida Sheibat-Othman and Hugo A. Jakobsen, 234–249
• On the solution of the dynamic population balance model describing emulsification: Evaluation of weighted residual methods
  Jannike Solsvik, Per J. Becker, Nida Sheibat-Othman and Hugo A. Jakobsen, 250–265
• Solution of the dynamic population balance equation describing breakage–coalescence systems in agitated vessels: The least-squares method
  Jannike Solsvik and Hugo A. Jakobsen, 266–287
• Monitoring silicone oil droplets during emulsification in stirred vessel: Effect of dispersed phase concentration and viscosity
  Per Julian Becker, François Puel, Yves Chevalier and Nida Sheibat-Othman, 296–306
• Online monitoring, simulation and prediction of multiphase flows
  Matthias Mickler, Hanin B. Jildeh, Menwer Attarakih and Hans-Jörg Bart, 307–317
• Non-aqueous, surfactant-free antifoam emulsions: Properties and triggered release
  Tatiana D. Dimitrova, Severine Cauvin, Jean-Paul Lecomte and Annick Colson, 330–336
• A dual approach for modelling and optimisation of industrial urea reactor: Smart technique and grey box model
  Sohrab Zendehboudi, Gholamreza Zahedi, Alireza Bahadori, Ali Lohi, Ali Elkamel and Ioannis Chatzis, 469–485
• Effect of liquid level and agitator pumping direction on turbulent blend times
  Kevin J. Myers, Jeremy K. Jones, Eric E. Janz and Julian B. Fasano, 643–647
• Support vector machines combined to observers for fault diagnosis in chemical reactors
  Nida Sheibat-Othman, Nassim Laouti, Jean-Pierre Valour and Sami Othman, 685–695
• Pumping characterisation of the maxblend impeller for Newtonian and strongly non-Newtonian fluids
  Vincent Stobiac, Louis Fradette, Philippe A. Tanguy and Francois Bertrand, 729–741
• Compartmental modelling of turbulent fluid flow for the scale-up of stirred tanks
  Hamed Bashiri, Mourad Heniche, François Bertrand and Jamal Chaouki, 1070–1081
• Population balance model: Breakage kernel parameter estimation to emulsification data
  Jannike Solsvik, Per J. Becker, Nida Sheibat-Othman and Hugo A. Jakobsen, 1082–1099
• Simulation of gas–solid flow in rectangular spouted bed by coupling CFD–DEM and LES
  Chunhua Wang, Zhaoping Zhong, Xiaoyi Wang and Siti Aisyah Alting, 1488–1494
• CFD characterization of monolithic reactors for kinetic studies
  Soheil Soltani, Carolin Wang-Hansen, Ronnie Andersson and Bengt Andersson, 1570–1578
• Modelling of a solid dissolution in liquid with chemical reaction: Application to the attack reaction of phosphate by sulphuric acid
  Nader Frikha, Amira Hmercha and Slimane Gabsi, 1829–1838
• Analysis of heat transfer in a vessel with helical pipe coil and multistage impeller
  Martin Dostál, Marcela Věříšová, Karel Petera, Tomáš Jirout and Ivan Fořt, 2115–2121
• CFD simulation and comparison of industrial crystallizers
  Chinmay V. Rane, Arijit A. Ganguli, Ekambara Kalekudithi, Raosaheb N. Patil, Jyeshtharaj B. Joshi and Doraiswami Ramkrishna, 2138–2156
• Selective hydrogenation of 3,4-dimethoxybenzophenone in liquid phase over Pd/C catalyst in a slurry reactor
  Manishkumar S. Tiwari, Ganapati D. Yadav and Flora T. T. Ng, 2157–2165

Chemical Engineering Science  Vol. 105-120　(2014)

• Micromixing performance of nanoparticle suspensions in a micro-sieve dispersion reactor
  C. Dong, J.S. Zhang, K. Wang, G.S. Luo, 8-15
• Fluid mixing in a microchannel with longitudinal vortex generators
  Kai-Yo Hsiao, Chih-Yang Wu, Yi-Tun Huang, 27-36
• Prediction of the mixing behaviour of binary mixtures of particles in a bladed mixer
  M. Halidan, G.R. Chandratilleke, S.L.I. Chan, A.B. Yu, J. Bridgwater, 37-48
• Numerical investigation on the reactive gas mixing through interaction between twin square jets side-by-side and a crossflow
  F. Roger, A. Gourara, J.-M. Most, H.Y. Wang, 45-55
• Volumetric mass transfer coefficient in multiple-impeller gas–liquid contactors. Scaling-up study for various impeller types
  Libor Labík, Radek Vostal, Tomáš Moucha, František Rejl, Michal Kordač, 55-61
• Swirl flow tube reactor technology: An experimental and computational fluid dynamics study
  Carl M. Schietekat, Marco W.M. van Goethem, Kevin M. Van Geem, Guy B. Marin, 56-65
• Flow field simulation and mixing efficiency assessment of the multi-inlet vortex mixer for molybdenum sulfide nanoparticle precipitation
  S. Bensaid, F.A. Deorsola, D.L. Marchisio, N. Russo, D. Fino, 66-77
• VDROP: A comprehensive model for droplet formation of oils and gases in liquids – Incorporation of the interfacial tension and droplet viscosity
  Lin Zhao, Jagadish Torlapati, Michel C. Boufadel, Thomas King, Brian Robinson, Kenneth Lee, 93-106
• Power consumption, local and average volumetric mass transfer coefficient in multiple-impeller stirred bioreactors for xanthan gum solutions
  Ming-hui Xie, Jian-ye Xia, Zhen Zhou, Guo-zhong Zhou, Ju Chu, Ying-ping Zhuang, Si-liang Zhang, Henk Noorman, 144-156
• Assessment of different methods of analysis to characterise the mixing of shear-thinning fluids in a Kenics KM static mixer using PLIF
  F. Alberini, M.J.H. Simmons, A. Ingram, E.H. Stitt, 152-169
• Synthesis of TiO2 nanoparticles in a spinning disc reactor
  Somaieh Mohammadi, Adam Harvey, Kamelia V.K. Boodhoo, 171-184
• Modeling of power characteristics for multistage rotor–stator mixers of shear-thinning fluids
  Huashuai Wu, Shuli Shu, Ning Yang, Guoping Lian, Shiping Zhu, Mingyan Liu, 173-182
• The characterization of the residence time distribution in a magnetic mixer by means of the information entropy
  Rafał Rakoczy, Marian Kordas, Grzegorz Story, Maciej Konopacki, 191-197
• Mixing dynamics in uncovered unbaffled stirred tanks
  A. Busciglio, F. Grisafi, F. Scargiali, A. Brucato, 210-219
• Monte Carlo simulation of free radical polymerization of styrene in a spinning disc reactor
  Yousef Mohammadi, Amir Saeid Pakdel, Mohammad Reza Saeb, Kamelia Boodhoo, 231-240
• Rapid vortex microfluidic mixer utilizing double-heart chamber
  Lung-Ming Fu, Wei-Ching Fang, Hui-Hsiung Hou, Yao-Nan Wang, Ting-Fu Hong, 246-251
• Using tomography to visualize the continuous-flow mixing of biopolymer solutions inside a stirred tank reactor
  Dineshkumar Patel, Farhad Ein-Mozaffari, Mehrab Mehrvar, 257-273
• Behaviour of air diffusers and oxygen transfer efficiencies in the biological treatment of matrices at high alkalinity concentrations: Experimental and full scale application
  Anna Laura Eusebi, Paolo Battistoni, 274-281

Chemical Engineering & Technology  Vol. 37 (2014)

• Prediction of the Induced Gas Flow Rate from a Self-Inducing Impeller with CFD
  Cláudio P. Fonte, Bruno S. Pinho, Vania Santos-Moreau and José Carlos B. Lopes, 571–579,
• Liquid-Solid Mass Transfer Behavior of a Stirred-Tank Reactor with a Fixed Bed at Its Bottom
  Mohamed A. El-Naggar, Mohamed H. Abdel-Aziz, Ahmed A. Zatout and Gomaa H. Sedahmed, 1525–1531,
• Energy Dissipation Rates of Newtonian and Non-Newtonian Fluids in a Stirred Vessel
  Xu Wang, Xin Feng, Chao Yang and Zai-Sha Mao, 1575–1582,
• Mass Transfer Reaction Kinetics of β-Isophorone Oxidation by Air in an Agitator Bubbling Reactor
  Hong Yin, Caiping Sheng, Zhirong Chen, Shenfeng Yuan, Haoran Li and Jun Mei, 1797–1804,

Industrial & Engineering Chemistry Research   Vol. 53 (2014)

• Flow and Mixing of Cohesive Particles in a Vertical Bladed Mixer
  Rohana Chandratilleke, Aibing Yu, John Bridgwater, and Kunio Shinohara, 4119–4130
• Flow Pattern, Mixing, Gas Hold-Up and Mass Transfer Coefficient of Triple-Impeller Configurations in Stirred Tank Bioreactors
  Minghui Xie, Jianye Xia, Zhen Zhou, Ju Chu, Yingping Zhuang, and Siliang Zhang, 5941–5953
• Experimental Investigations in Liquid–Liquid Dispersion System: Effects of Dispersed Phase Viscosity and Impeller Speed
  Mohd Izzudin Izzat Zainal Abidin, Abdul Aziz Abdul Raman, and Mohamad Iskandr Mohamad Nor, 6554–6561
• Markov Chain Modeling the Mixing of Coal and Solid Heat Carriers in a Continuous Colliding Static Mixer
  Minshu Zhan, Shuxian Liu, Yuming Zhang, Guogang Sun, and Li Weng, 6830–6839
• Solid–Liquid Suspensions in Top-Covered Unbaffled Vessels: Influence of Particle Size, Liquid Viscosity, Impeller Size, and Clearance
  A. Tamburini, A. Brucato, A. Busciglio, A. Cipollina, F. Grisafi, G. Micale, F. Scargiali, and G. Vella, 9587–9599
• Effects of Geometry and Process Conditions on Mixing Behavior of a Multijet Mixer
  Kaikai Pei, Ruijiang Li, and Zibin Zhu, 10700–10706
• External Heat Transfer Coefficient in Agitated Vessels Using a Radial Impeller and Vertical Tube Baffles
  Vitor da Silva Rosa, Marlene Silva de Moraes, Juliana Tófano de Campos Leite Toneli, and Deovaldo de Moraes Júnior, 13797–13803
• Negative Impact of High Stirring Speed in Laboratory-Scale Three-Phase Hydrogenations
  Inci Ayranci, Suzanne Kresta, Jing Shen, and Natalia Semagina, 18091–18094
• Experimental Study on Micromixing in a Single-Feed Semibatch Precipitation Process in a Gas–Liquid–Liquid Stirred Reactor
  Dang Cheng, Xin Feng, Chao Yang, Jingcai Cheng, and Zai-Sha Mao, 18420–18429

JOURNAL OF CHEMICAL ENGINEERING OF JAPAN   Vol. 47 (2014)

• Enhancement in the Crystal Growth Rate for a Classified Bed-Type Crystallizer Using the Adhesion Phenomena of Fine Crystals
  Koji Masaoka, Ryuta Misumi, Kazuhiko Nishi, Meguru Kaminoyama, 78-84 
• Review of Visualization of Flow and Dispersion States of Slurry System Fluids in Stirred Vessels
  Meguru Kaminoyama, 109-114 
• Power Consumption and Mixing Performance of an Eccentrically Located Maxblend Impeller
  Kazuhiko Nishi, Naoki Enya, Ryuta Misumi, Meguru Kaminoyama, 146-150 
• Process Development for Ultrasonic Fracturing of Zirconium Phosphate Particles
  Takafumi Horie, Shinsuke Akao, Takayuki Suzuki, Koki Tanaka, Ning Jia, Keita Taniya, Satoru Nishiyama, Naoto Ohmura, 124-129 
• Fluid Deformation Induced by a Rotationally Reciprocating Impeller
  Saki Senda, Yoshiyuki Komoda, Yushi Hirata, Hiroshi Takeda, Hiroshi Suzuki, Ruri Hidema, 151-158
• Flow and Oxygen-Dissolution Characteristics of Microbubbles in a Viscoelastic Fluid
  Hiroshi Suzuki, Yuto Furukawa, Ruri Hidema, Yoshiyuki Komoda 201-206
• CFD Prediction of Effects of Impeller Design on Floating Solids Mixing in Stirred Tanks with Pitched Blade Turbines
  Shengchao Qiao, Rijie Wang, Xiaoxia Yang, Yuefei Yan, 373-381 
• Mixing Performance Evaluation in Continuous Laminar Flow
  Yusuke Suzuki, Ryuta Misumi, Kazuhiko Nishi, Meguru Kaminoyama, 363-372
• Gas Dispersion in an Agitated Vessel Equipped with Large Impeller
  Koji Takahashi, Itaru Tanimoto, Hitoshi Sekine, Yasuyuki Takahata, 717-721 
• Effects of Impeller Type on Mixing Performance in Continuous Laminar Flow
  Yusuke Suzuki, Ryuta Misumi, Kazuhiko Nishi, Meguru Kaminoyama, 805-814

Chemical Engineering Research & Design(IChemE) 　Vol. 92 (2014)

• Static mixers: Mechanisms, applications, and characterization methods – A review
  Akram Ghanem, Thierry Lemenand, Dominique Della Valle, Hassan Peerhossaini, 205-228
• CFD analysis of interphase mass transfer and energy dissipation in a milliliter-scale stirred-tank reactor for filamentous microorganisms
  Stefanie Brüning, Dirk Weuster-Botz, 240-248
• Mixing of viscous Newtonian fluids in a vessel equipped with steady and unsteady rotating dual-turbine impellers
  Szymon Woziwodzki, 435-446
• CFD simulation and PIV measurement of the flow field generated by modified pitched blade turbine impellers
  Chun-Yan Ge, Jia-Jun Wang, Xue-Ping Gu, Lian-Fang Feng, 1027-1036
• Influence of drag and turbulence modelling on CFD predictions of solid liquid suspensions in stirred vessels
  A. Tamburini, A. Cipollina, G. Micale, A. Brucato, M. Ciofalo, 1045-1063
• CFD modeling of gas entrainment in stirred tank systems
  A.L. Kulkarni, A.W. Patwardhan, 1227-1248
• Reduced power consumption compared to a traditional stirred tank reactor (STR) for enzymatic saccharification of alpha-cellulose using oscillatory baffled reactor (OBR) technology
  Matthew S.R. Abbott, Gustavo Valente Perez, Adam P. Harvey, Mike K. Theodorou, 1969-1975
• Effect of the impeller imbalance on the bending moment acting on a shaft in a stirred vessel
  Daien Shi, Yangyang Liang, Archie Eaglesham, Zhengming Gao, 2191-2200
• Effect of gas flow on the bending moment acting on a shaft in a sparged vessel stirred by a Pitched Blade Turbine
  Daien Shi, Ziqi Cai, Yangyang Liang, Archie Eaglesham, Zhengming Gao, 2255-2263
• The effect of melt viscosity on thermal efficiency for single screw extrusion of HDPE
  Javier Vera-Sorroche, Adrian L. Kelly, Elaine C. Brown, Tim Gough, Chamil Abeykoon, Phil D. Coates, Jing Deng, Kang Li, Eileen Harkin-Jones, Mark Price, 2404-2412
• Automated self seeding of batch crystallizations via plug flow seed generation
  Steven Ferguson, Gary Morris, Hongxun Hao, Mark Barrett, Brian Glennon, 2534-2541

化学工学論文集 Vol. 40 (2014)

• ディスパー翼の撹拌所要動力の相関
  加藤 禎人, 南雲 亮, 古川 陽輝, 伊藤 晋太朗, 多田 豊, 高 承台, 李 泳世, 1-4
• コーン型ドラフトチューブ付撹拌槽の混合性能
  古川 陽輝, 加藤 禎人, 南雲 亮, 多田 豊, 佐藤 誠, 282-285
• 種々の形状を持った撹拌翼における通気時の撹拌動力の推算
  相田 真男, 庄野 厚, 366-371
• 邪魔板無しおよび弱い邪魔板条件の気液撹拌槽における所要動力と物質移動
  亀井 登, 加藤 禎人, 南雲 亮, 古川 陽輝, 鈴木 智也, 多田 豊, 372-375
• 流体混合と黄金比条件
  井上 義朗, 川添 博, 山田 雅弘, 平田 雄志, 449-461 79-484