文献リスト

AIChE Journal Vol.59 (2013)

• Elaboration of Controlled Structure Foams with the SMX Static Mixer
  Talansier, Emeline; Dellavalle, Dominique; Loisel, Catherine; et al., 132-145
• On the Fluid Dynamics of Shaken Bioreactors-Flow Characterization and Transition
  Weheliye, W.; Yianneskis, M.; Ducci, A., 334-344
• Measurement and Analysis of Flow of Concentrated Fiber Suspensions through a 2-D Sudden Expansion Using UVP
  Claesson, Julia; Rasmuson, Anders; Wiklund, Johan; et al., 1012-1021
• In-Line Jet Mixing of Liquid-Pulp-Fiber Suspensions: Effect of Fiber Properties, Flow Regime, and Jet Penetration
  Yenjaichon, Wisarn; Grace, John R.; Lim, Choon Jim; et al., 1420-1430
• Experimental and Numerical Study of Mixing Behavior inside Droplets in Microchannels
  Wang, Wentan; Shao, Ting; Zhao, Shufang; et al., 1801-1813
• Characterization of Mixing and Size Segregation in a Rotating Drum by a Particle Tracking Method
  Alizadeh, Ebrahim; Dube, Olivier; Bertrand, Francois; et al., 1894-1905
• Numerical study of mixing and thermal conduction of granular particles in rotating tumblers
  Gui, Nan; Gao, Jinsen; Ji, Zhongli,1906-1918
• 3-D numerical simulations on flow and mixing behaviors in gasliquidsolid microchannels
  Tang Can; Liu Mingyan; Xu Yonggui, 1934-1951
• Drop-size distributions and spatial distributions in an annular centrifugal contactor
  Wyatt, Nicholas B.; O’Hern, Timothy J.; Shelden, Bion, 2219-2226
• Experimental determination of the shear rate in a stirred tank with a non-newtonian fluid: Carbopol
  Gabelle, J-C.; Morchain, J.; Anne-Archard, D.; et al., 2251-2266
• The simplest stirred tank for laminar mixing: Mixing in a vessel agitated by an off-centered angled disc
  Bulnes-Abundis, D.; Alvarez, M. M., 3092-3108
• Spectral properties and low-dimensional description of loop and recycle reactors
  Alam, Imran; Balakotaiah, Vemuri, 3365-3377
• Determination of Maximum Turbulent Energy Dissipation Rate generated by a Rushton Impeller through Large Eddy Simulation
  Soos, Miroslav; Kaufmann, Rene; Winteler, Raphael; et al., 3642-3658
• Stereo-PIV Experiments and Large Eddy Simulations of Flow Fields in Stirred Tanks with Rushton and Curved-Blade Turbines
  Li, Zhipeng; Song, Ge; Bao, Yuyun; et al., 3986-4003
• Mixing Behaviors of Wet Granular Materials in Gas Fluidized Bed Systems
  Lim, Eldin Wee Chuan; Tan, Reginald Beng Hee; Xiao, Zongyuan, 4058-4067
• Double Emulsions of Immiscible Polymer Blends Stabilized by Interfacially Active Nanoparticles
  Li, Qiong; Huang, Yajiang; Xi, Shuting; et al., 4373-4382
• Thermodynamics of Shear-Induced Phase Transitions for Multicomponent Fluid Mixtures
  Canas-Marin, Wilson A., 4383-4389
• Assessment of Gel Formation in Colloidal Dispersions during Mixing in Turbulent Jets
  Soos, Miroslav; Marchisio, Daniele L.; Sefcik, Jan, 4567-4581

Canadian Journal of Chemical Engineering Vol.91 (2013)

• Characterisation of the mixing of non-newtonian fluids with a scaba 6SRGT impeller through ert and CFD
  Pakzad, Leila; Ein-Mozaffari, Farhad; Upreti, Simant R.; et al., 90-100
• Effect of baffles on fluid flow field in stirred tank with floating particles by using PIV
  Atibeni, Rajab; Gao, Zhengming; Bao, Yuyun, 570-578
• Numerical simulation of a pitched-blade turbine stirred tank with mirror fluid method
  Wang, Tao; Cheng, Jingcai; Li, Xiangyang; et al., 902-914
• Effect of solids loading on agitator just-suspended speed
  Myers, Kevin J.; Janz, Eric E.; Fasano, Julian B., 1508-1512
• Just-suspended agitation of solid mixtures
  Bao, Tianxin; Myers, Kevin J.; Janz, Eric E.; et al., 1632-1640
• Double Diffusive Convection and Thermodiffusion of Fullerene-Toluene Nanofluid in a Porous Cavity
  Ahadi, Amirhossein; Yousefi, Tooraj; Saghir, M. Ziad, 1918-1927

Chemical Engineering Science Vol.85-104 (2013)

• Residence time distributions of in-line high shear mixers with ultrafine teeth
  Xu, Shuangqing; Shi, Jintao; Cheng, Qin; et al., Vol. 87, 111-121
• Regime map development for continuous twin screw granulation
  Tu, Wei-Da; Ingram, Andy; Seville, Jonathan, Vol. 87, 315-326
• Particle distribution in dilute solid liquid unbaffled tanks via a novel laser sheet and image analysis based technique
  Tamburini, A.; Cipollina, A.; Micale, G.; et al., Vol. 87, 341-358
• Comparison between average shear rates in conventional bioreactor with Rushton and Elephant ear impellers
  Bustamante, M. C. C.; Cerri, M. O.; Badino, Alberto C., Vol. 90, 92-100
• Statistics of the scalar dissipation rate using direct numerical simulations and planar laser-induced fluorescence data
  Markides, Christos N.; Chakraborty, Nilanjan, Vol. 90, 221-241
• Evolution of dispersed drops during the mixing of mineral oil and water phases in a stirring tank
  Wang, Wei; Liu, Jia; Wang, Pengyu; et al., Vol. 91, 173-179
• Gas dispersion in pulp-suspension flow in the presence of an in-line mechanical mixer
  Yenjaichon, Wisarn; Grace, John R.; Lim, C. Jim; et al., Vol. 93, 22-31
• Remotely excited magnetic nanoparticles and gas-liquid mass transfer in Taylor flow regime
  Hajiani, Pouya; Larachi, Faical, Vol. 93, 257-265
• Multi-scale models for the optimization of batch bioreactors
  Liew, Emily Wan-Teng; Nandong, Jobrun; Samyudia, Yudi, Vol. 95, 257-266
• Numerical investigation of near-critical fluid convective flow mixing in microchannels
  Chen, Lin; Zhang, Xin-Rong; Okajima, Junnosuke; et al., Vol. 97, 67-80
• DEM simulation and analysis of particle mixing and heat conduction in a rotating drum
  Gui, Nan; Yan, Jie; Xu, Wenkai; et al., Vol. 97, 225-234
• A mechanistic model for pressure drops in corrugated plates static mixers
  Paglianti, Alessandro; Montante, Giuseppina, Vol. 97, 376-384
• Study of two phase thermal stratification in cylindrical vessels: CFD simulations and PIV measurements
  Gandhi, Mayurkumar S.; Joshi, Jyeshtharaj B.; Vijayan, Pallippattu K., Vol. 98, 125-151
• Transition from turbulent to transitional flow in the top half of a stirred tank
  Machado, Marcio B.; Bittorf, Kevin J.; Roussinova, Vesselina T.; et al., Vol. 98, 218-230
• Experimental study and numerical simulation of local void fraction in cold-gassed and hot-sparged stirred reactors
  Yang, Jie; Bao, Yuyun; Lin, Mingli; et al., Vol. 100, 83-90
• Mixing performance and drug nano-particle preparation inside slugs in a gas-liquid microchannel reactor
  Zhao, Shufang; Wang, Wentan; Shao, Ting; et al., Vol. 100, 456-463
• Mass transfer characteristics of gas-liquid absorption during Taylor flow in mini/microchannel reactors
  Ganapathy, Harish; Al-Hajri, Ebrahim; Ohadi, Michael, Vol. 101, 69-80
• The kinematics of non-cohesive, sphero-cylindrical particles in a low-speed, vertical axis mixer
  Hua, X.; Curtis, J.; Hancock, B.; et al., Vol. 101, 144-164
• Numerical simulation of macro-mixing in liquid-liquid stirred tanks
  Cheng, Dang; Feng, Xin; Cheng, Jingcai; et al., Vol. 101, 272-282
• Discrete element model for an attritor mill with impeller responding to interactions with milling balls
  Santhanam, Priya R.; Ermoline, Alexandre; Dreizin, Edward L., Vol. 101, 366-373
• Kinetic investigation of the Dushman reaction at concentrations relevant to mixing studies in microstructured cyclone type mixers
  Koelbl, A.; Kraut, M.; Dittmeyer, R., Vol. 101, 454-460
• Bread dough aeration dynamics during pressure step-change mixing: Studies by X-ray tomography, dough density and population balance modelling
  Trinh, L.; Lowe, T.; Campbell, G. M.; et al., Vol. 101, 470-477
• A novel and energy-efficient coaxial mixer for agitation of non-Newtonian fluids possessing yield stress
  Pakzad, Leila; Ein-Mozaffari, Farhad; Upreti, Simant R.; et al., Vol. 101, 642-654
• Mixing time in high aspect ratio vessels stirred with multiple impellers
  Magelli, Franco; Montante, Giuseppina; Pinelli, Davide; et al., Vol. 101, 712-720
• Numerical modelling of velocity field and phase distribution in dense monodisperse solid-liquid suspensions under different regimes of agitation: CFD and PEPT experiments
  Liu, Li; Barigou, Mostafa, Vol. 101, 837-850
• Scale-up effects on flow patterns in the high shear mixing of cohesive powders
  Cavinato, Mauro; Artoni, Riccardo; Bresciani, Massimo; et al., Vol. 102, 1-9
• Liquids mixing enhanced by multiple synthetic jet pairs at low Reynolds numbers
  Xia, Qingfeng; Zhong, Shan, Vol. 102, 10-23
• Direct numerical simulation of wall-to liquid heat transfer in dispersed gas-liquid two-phase flow using a volume of fluid approach
  Deen, Niels G.; Kuipers, J. A. M., Vol. 102, 268-282
• On the measurement of local gas hold-up, interfacial area and bubble size distribution in gas-liquid contactors via light sheet and image analysis: Imaging technique and experimental results 
  Busciglio, A.; Grisafi, F.; Scargiali, F.; et al., Vol. 102, 551-566
• Measurement of maximum stable drop size in aerated dilute liquid-liquid dispersions in stirred tanks
  Daub, A.; Boehm, M.; Delueg, S.; et al., Vol. 104, 147-155
• Chaotic mixing by longitudinal vorticity
  Habchi, Charbel; Harion, Jean-Luc; Russeil, Serge; et al., Vol. 104, 439-450
• A combined lossy capacitor population balance model (LCPBM) for calculating the influence of frequency on electric field enhanced coalescence in a static-mixer settler setup
  Barega, Esayas W.; Zondervan, Edwin; de Haan, Andre B., Vol. 104, 727-741
• Free-surface shape in unbaffled stirred vessels: Experimental study via digital image analysis
  Busciglio, A.; Caputo, G.; Scargiali, F., Vol. 104, 868-880
• Laminar mixing performances of baffling, shaft eccentricity and unsteady mixing in a cylindrical vessel
  Ng, K. C.; Ng, E. Y. K., Vol. 104, 960-974

Chemical Engineering & Technology Vol.36 (2013)

• Estimation of Mixing Ratio for Saturated Air over Water
  Bahadori, Alireza; Zendehboudi, Sohrab; Zahedi, Gholamreza, 109-114
• Hydrodynamics Characterization of an Ellipse Gate Impeller by Experimental and Numerical Studies 
  Xie, Ming-hui; Xia, Jian-ye; Zhou, Guo-zhong; et al., 115-122
• High-Throughput T-Jets Mixers: An Innovative Scale-Up Concept 
  Sultan, Mohamed A.; Krupa, Kateryna; Fonte, Claudio P.; et al., 323-331
• Micromixing of Solid-liquid Systems in a Stirred Tank with Double Impellers 
  Yang, Lei; Cheng, Jingcai; Fan, Ping; et al., 443-449
• Using Tomography to Characterize the Mixing of Non-Newtonian Fluids with a Maxblend Impeller 
  Patel, Dineshkumar; Ein-Mozaffari, Farhad; Mehrvar, Mehrab, 687-695
• State of the Art of Mini/Micro Jet Reactors 
  Santos, Ricardo J.; Ashar Sultan, M., 937-949
• Power Consumption of Liquid and Liquid/Solid Systems in a Rotating-Drum Bioreactor
  Wang, Zhihui; Wen, Shumei; Zhang, Qinghua; et al., 1395-1401
• Experiments and Simulations on Bidisperse Solids Suspension in a Mixing Tank 
  Ayranci, Inci; Kresta, Suzanne M.; Derksen, Jos J., 1957-1967

Industrial & Engineering Chemistry Research Vol.52 (2013)

• Pilot-Scale Examination of Mixing Liquid into Pulp Fiber Suspensions in the Presence of an In-Line Mechanical Mixer 
  Yenjaichon, Wisarn; Grace, John R.; Lim, C. Jim; et al., 485-498
• External Coefficient of Heat Transfer by Convection in Mixed Vessels Using Vertical Tube Baffles 
  Rosa, Vitor da Silva; de Souza Pinto, Thiago Cesar; Santos, Aldo Ramos; et al., 2434-2438
• Mixing Effects on the Kinetics of Enzymatic Hydrolysis of Avicel for Batch Production of Cellulosic Ethanol
  Gaikwad, Ashwin; Chakraborty, Saikat, 3988-3999
• Lagrangian Simulation of Steady and Unsteady Laminar Mixing by Plate Impeller in a Cylindrical Vessel 
  Ng, K. C.; Ng, E. Y. K.; Lam, W. H., 10004-10014
• Inclined-Shaft Agitation for Improved Viscous Mixing  
  Wang, Steven; Wu, Jie; Ohmura, Naoto, 11741-11751
• Nonhomogeneous Mixing Population Balance Model for the Prediction of Particle Size Distribution in Large Scale Emulsion Polymerization Reactors 
  Alexopoulos, Aleck H.; Pladis, Prokopis; Kiparissides, Costas, 12285-12296
• Intensified Gas-Liquid Mixing in a Quench Box under the Driving of Supergravitational Swirling Flow 
  Wang, Zhenyuan; Cheng, Zhenmin; Huang, Zibin; et al., 12802-12811
• Study of Mixing Time in a Liquid Vessel with Rotating and Reciprocating Agitator 
  Kordas, Marian; Story, Grzegorz; Konopacki, Maciej; et al., 13818-13828
• Basket Impeller Extractive Reactor Column for Biodiesel Production: An Experimental Study 
  Chesterfield, Dean M.; Tin Cao Trung; Lucien, Frank P.; et al., 15298-15310
• Research on Heat Transfer Performance of Coaxial Mixer with Inner Combined Impeller
  Liu, Baoqing; Zhang, Yikun; Liu, Jingliang; et al., 17285-17293
• Impinging Jet Micromixer for Flow Synthesis of Nanocrystalline MgO: Role of Mixing/Impingement Zone
  Kumar, D. V. Ravi; Prasad, B. L. V.; Kulkarni, A. A., 17376-17382

JOURNAL OF CHEMICAL ENGINEERING OF JAPAN Vol.46 (2013)

https://www.jstage.jst.go.jp/browse/jcej/45/0/_contents

• Photographic Study of Bubble Size and Void Fraction Distributions in a Gas-Liquid Stirred Tank with Hollow Blade Turbine 
  Geng, Xuan; Gao, Zhengming; Bao, Yuyun, 107-115
• A Study of the Effects on Cooling Rate of Impeller Shape with the Aim of Scaling up a Cream Cooling Storage Tank 
  Miyamoto, Tetsuo; Shidara, Hideo; Inagaki, Koji; Nishi, Kazuhiko; Misumi, Ryuta; Kaminoyama, Meguru, 181-186
• Mixing Performance of Passive Micromixer with Sinusoidal Channel Walls 
  Afzal, Arshad; Kim, Kwang-Yong, 230-238
• Power Correlations and Mixing Patterns of Several Large Paddle Impellers with Dished Bottoms 
  Furukawa, Haruki; Kato, Yoshihito; Kato, Tomoho; et al., 255-261
• Micromixing Efficiency in an Asymmetric Confined Impinging Jet Reactor 
  Gao, Zhengming; Han, Jing; Bao, Yuyun; et al., 683-688
• Semi-Lagrangian Method for Numerical Analysis of Fluid Mixing in T-Shaped Micromixer 
  Matsunaga, Takuya; Nishino, Koichi, 699-708
• Micromixing Characteristics in the Impeller Discharging Area in Aerated Stirred Tank 
  Li, Wanbo; Geng, Xingye; Bao, Yuyun; et al., 717-725
• Evaluation for the Mixing Performance of a Microreactor with Inline Measurement 
  Asano, Yukako; Togashi, Shigenori; Endo, Yoshishige, 770-776

Chemical Engineering Research & Design(IChemE) Vol.91 (2013)

• Experimental investigation of the flow dynamics of rheologically complex fluids in a Maxblend impeller system using PIV 
  Fontaine, A.; Guntzburger, Y.; Bertrand, F.; et al., 7-17
• CFD analysis of inter-phase forces in a bubble stirred vessel 
  Zhang, Yanhong; Bai, Yulan; Wang, Hualin, 29-35
• Solid-liquid mass transfer in relation to diffusion controlled corrosion at the outer surface of helical coils immersed in agitated vessels 
  Abdel-Aziz, M. H., 43-50
• Prediction of just suspended speed for mixed slurries at high solids loadings 
  Ayranci, Inci; Ng, Theodore; Etchells, Arthur W., III; et al., 227-233
• Effect of impeller type and position in a batch cooling crystallizer on the growth of borax decahydrate crystals 
  Kacunic, Antonija; Akrap, Marija; Kuzmanic, Nenad, , 274-285
• Study air-water system in horizontal loop geometry 
  Rihani, R.; Legrand, J., 409-417
• Agitation of Herschel-Bulkley fluids with the Scaba-anchor coaxial mixers 
  Pakzad, Leila; Ein-Mozaffari, Farhad; Upreti, Simant R.; et al., 761-777
• Two-step design protocol for patterned groove micromixers 
  Sabotin, Izidor; Tristo, Gianluca; Junkar, Mihael; et al., 778-788
• Axial thrust of axial flow impellers 
  Fort, Ivan; Seichter, Pavel; Pesl, Lubos, 789-794
• Reduced IMRs in a mixing tank via agitation improvement 
  Wang, Steven; Wu, Jie; Bong, EngYing, 1009-1017
• Characterization of the continuous-flow mixing of non-Newtonian fluids using the ratio of residence time to batch mixing time 
  Patel, Dineshkumar; Ein-Mozaffari, Farhad; Mehrvar, Mehrab, 1223-1234
• Electrical Resistance Tomography (ERT) applications to Chemical Engineering 
  Sharifi, Mohadeseh; Young, Brent, 1625-1645
• Using tomography to assess the efficiency of the coaxial mixers in agitation of yield-pseudoplastic fluids 
  Pakzad, Leila; Ein-Mozaffari, Farhad; Upreti, Simant R.; et al., 1715-1724
• On the mean drop size of toluene/water dispersion in the presence of silica nanoparticles 
  Raji-Asadabadi, Maliheh; Abolghasemi, Hossein; Maragheh, Mohammad Ghannadi; et al., 1739-1747
• On POD analysis of PIV measurements applied to mixing in a stirred vessel with a shear thinning fluid 
  Line, A.; Gabelle, J. -C.; Morchain, J.; et al., 2073-2083
• Mixing time and kinetic energy measurements in a shaken cylindrical bioreactor 
  Rodriguez, G.; Weheliye, W.; Anderlei, T.; et al., 2084-2097
• Development of method for estimating drop diameter in the manufacturing process of functional O/W microcapsules 
  Kanaya, Kento; Akao, Shinsuke; Misumi, Ryuta; Nishi, Kazuhiko; Kaminoyama, Meguru; et al., 2098-2105
• Development of positron emission particle tracking for studying laminar mixing in Kenics static mixer 
  Rafiee, Marjan; Simmons, Mark J. H.; Ingram, Andy; et al., 2106-2113
• Dispersion of water into oil in a rotor-stator mixer. Part 2: Effect of phase fraction 
  Rueger, Paul E.; Calabrese, Richard V., 2134-2141
• Investigations of mass transfer with chemical reactions in two-phase liquid-liquid systems 
  Jasinska, Magdalena; Baldyga, Jerzy; Cooke, Michael; et al., 2169-2178
• Investigation of turbulence modulation in solid-liquid suspensions using parallel competing reactions as probes for micro-mixing efficiency 
  Unadkat, H.; Nagy, Z. K.; Rielly, C. D., 2179-2189
• Advanced impeller design: Anti-ragging impeller, ARI2 
  Higbee, Robert W.; Giacomelli, Jason J.; Wyczalkowski, Wojciech R., 2190-2197
• Fluid-dynamics characteristics of a vortex-ingesting stirred tank for biohydrogen production 
  Montante, Giuseppina; Magelli, Franco; Paglianti, Alessandro, 2198-2208
• The confined impeller stirred tank (CIST): A bench scale testing device for specification of local mixing conditions required in large scale vessels 
  Machado, Marcio B.; Kresta, Suzanne M., 2209-2224
• Mixing and recirculation characteristics of gas-liquid Taylor flow in microreactors 
  Abadie, T.; Xuereb, C.; Legendre, D.; et al., 2225-2234
• Experimental and numerical investigation on mixing and axial dispersion in Taylor-Couette flow patterns 
  Nemri, Marouan; Climent, Eric; Charton, Sophie; et al., 2346-2354

化学工学論文集 Vol.39 (2013)

https://www.jstage.jst.go.jp/browse/kakoronbunshu/39/0/_contents/-char/ja/

• ドラフトチューブを備えた攪拌槽の攪拌所要動力
  古川 陽輝, 加藤 禎人, 多田 豊, 高 承台, 李 泳世, 9-12
• 6段縦型攪拌槽における逆流量と交換流量におよぼす液粘度の影響
  大平 勇一, 島津 昌光, 小幡 英二, 安藤 公二, 13-17
• 角型撹拌槽の所要動力の相関
  古川 陽輝, 加藤 禎人, 加藤 史都, 深津 吉孝, 多田 豊, 94-97
• ヘリカルコイル付撹拌槽の所要動力の相関
  古川 陽輝, 加藤 禎人, 伊藤 晋太朗, 多田 豊, 171-174
• 角型偏芯撹拌槽の所要動力の相関
  古川 陽輝, 加藤 禎人, 深津 吉孝, 多田 豊, 175-177
• コンケーブタービンを含む2段翼を備えた気液撹拌槽における所要動力
  古川 陽輝, 亀井 登, 加藤 禎人, 賀 成莉, 鈴木 智也, 多田 豊, 287-289
• 角型偏芯撹拌槽に備えられたプロペラ翼の動力相関
  古川 陽輝, 加藤 禎人, 深津 吉孝, 多田 豊, 290-293
• 特殊アンカー翼を用いたクリーム冷却保持槽における翼形状と回転方向が冷却速度におよぼす影響のCFD解析
  宮本 哲夫, 稲垣 孝二, 仁志 和彦, 三角 隆太, 上ノ山 周, 413-419
• 直方体型偏芯撹拌槽の所要動力の相関
  古川 陽輝, 加藤 禎人, 深津 吉孝, 多田 豊, 高 承台, 李 泳世, 479-484