文献リスト


平成24年度(2012年度)文献リスト

2012年1月1日

AIChE Journal Vol.58(2012)

  • Impact of process parameters on critical performance attributes of a continuous blenderuA DEM-based study Dubey, Atul; Vanarase, Aditya U.; Muzzio, Fernando J. (pages 3676-3684) DOI: 10.1002/aic.13770
  • Direct numerical simulation of the turbulent flow in a baffled tank driven by a Rushton turbine Gillissen, J. J. J.; Van den Akker, H. E. A. (pages 3878-3890) DOI: 10.1002/aic.13762
  • Wet granular flows in a bladed mixer: Experiments and simulations of monodisperse spheres
    Remy, Brenda; Khinast, Johannes G.; Glasser, Benjamin J. (pages 3354-3369) DOI: 10.1002/aic.13743
  • New quadrature-based moment method for the mixing of inert polydisperse fluidized powders in commercial CFD codes Mazzei, Luca; Marchisio, Daniele L.; Lettieri, Paola (pages 3054-3069) DOI: 10.1002/aic.13714
  • Detached eddy simulation on the turbulent flow in a stirred tank
    Gimbun, J.; Rielly, C. D.; Nagy, Z. K.; et al. (pages 3224-3241) DOI: 10.1002/aic.12807
  • Highly resolved simulations of solids suspension in a small mixing tank Derksen, J. J. (pages 3266-3278) DOI: 10.1002/aic.13889
  • Impeller characterization and selection: Balancing efficient hydrodynamics with process mixing requirements Machado, Marcio B.; Nunhez, Jose Roberto; Nobes, David; et al. (pages 2573-2588) DOI: 10.1002/aic.12758
  • Impeller characteristics and selection: Balancing efficient hydrodynamics with process mixing requirements – Comments Fort, Ivan (pages 2621-2621) DOI: 10.1002/aic.13837
  • Influence of hydrodynamics on liquid mixing during Taylor flow in a microchannel
    Su, Yuanhai; Chen, Guangwen; Yuan, Quan (pages 1660-1670) DOI: 10.1002/aic.12698
  • Power consumption characteristics of an in-line silverson high shear mixer
    Cooke, M.; Rodgers, T. L.; Kowalski, A. J. (pages 1683-1692) DOI: 10.1002/aic.12703
  • Suspension of ultrahigh concentration solids in an agitated vessel
    Wang, Steven; Parthasarathy, Rajarathinam; Bong, Eng Ying; et al. (pages 1291-1298) DOI: 10.1002/aic.12657
  • Subgrid Scale Scalar Variance in High-Schmidt-Number Turbulence
    Kurose, Ryoichi; Takagaki, Naohisa; Michioka, Takenobu; et al. (pages 377-384) DOI: 10.1002/aic.12591
  • A Computational Fluid Dynamics Study of Supercritical Antisolvent Precipitation: Mixing Effects on Particle Size Sierra-Pallares, Jose; Marchisio, Daniele L.; Teresa Parra-Santos, Maria; et al. (pages 385-398) DOI: 10.1002/aic.12594
  • Lagrangian Tools for the Analysis of Mixing in Single-Phase and Multiphase Flow Systems Guida, Antonio; Nienow, Alvin W.; Barigou, Mostafa (pages 31-45) DOI: 10.1002/aic.12557
  • Periodic Section Modeling of Convective Continuous Powder Mixing Processes
    Gao, Yijie; Ierapetritou, Marianthi; Muzzio, Fernando (pages 69-78) DOI: 10.1002/aic.12563

Canadian Journal of Chemical Engineering Vol.90(2012)

  • Investigation of the mechanism of low-density particle and liquid mixing process in a stirred vessel Chen, Tao; Wang, Le-Qin; Wu, Da-Zhuan; et al. (pages 925-935) DOI: 10.1002/cjce.20578
  • Analysis of energy dissipation in stirred suspension polymerisation reactors using computational fluid dynamics Nogueira, E. S.; Pinto, J. C.; Vianna, A. S., Jr. (pages 983-995) DOI: 10.1002/cjce.20611
  • Stagnation point flow towards a stretching/shrinking sheet in a micropolar fluid with a convective surface boundary condition
    Yacob, Nor Azizah; Ishak, Anuar (pages 621-626) DOI: 10.1002/cjce.20517
  • Effect of impeller type on continuous-flow mixing of non-Newtonian fluids in stirred vessels through dynamic tests Patel, Dineshkumar; Ein-Mozaffari, Farhad; Mehrvar, Mehrab (pages 290-298) DOI: 10.1002/cjce.21628
  • Comments to “CFD simulation of stirred tanks: Comparison of turbulence models. Part I: Radial flow impellers” and “Part II: Axial flow impellers, multiple impellers and multiphase dispersions”
    Fort, Ivan (pages 1-2) DOI: 10.1002/cjce.20681
  • Reply to the “comments to CFD simulation of stirred tanks: Comparison of turbulence models. Part I: Radial flow impellers and part II: Axial flow impellers, multiple impellers and multiphase dispersions”
    Joshi, J. B.; Nere, N. K.; Rane, C. V.; et al. (pages 3-6) DOI: 10.1002/cjce.21610

Chemical Engineering Science Vol.67-84 (2012)

  • Numerical study of mixing behavior with chemical reactions in micro-channels by a lattice Boltzmann method Wang, Wentan; Zhao, Shufang; Shao, Ting; et al. (pages 148-154) DOI: 10.1016/j.ces.2012.08.028
  • Prediction of air bubble dispersion in a viscous fluid in a twin-screw continuous mixer using FEM simulations of dispersive mixing Vyakaranam, Kiran V.; Kokini, Jozef L. (pages 303-314) DOI: 10.1016/j.ces.2012.07.014
  • Flow and mixing performance in helical ribbon mixers
    Robinson, Martin; Cleary, Paul W. (pages 382-398) DOI: 10.1016/j.ces.2012.08.044
  • The functionalization of carbon nanotubes using a batch oscillatory flow reactor
    Melendi, S.; Bonyadi, S.; Castell, P.; et al. (pages 544-551) DOI: 10.1016/j.ces.2012.09.004
  • Mixing enhancement of novel passive microfluidic mixers with cylindrical grooves
    Wang, Lei; Liu, Danqing; Wang, Xuejing; et al. (pages 157-163) DOI: 10.1016/j.ces.2012.07.004
  • Flow regimes and surface air entrainment in partially filled stirred vessels for different fill ratios Motamedvaziri, Shilan; Armenante, Piero M. (pages 231-250) DOI: 10.1016/j.ces.2012.05.050
  • Visualization of partially mixed region by use of periodical reaction
    Hashimoto, Shunsuke; Chikamochi, Yusuke; Inoue, Yoshiro (pages 30-38) DOI: 10.1016/j.ces.2012.05.053
  • CFD study of single phase and multiphase (liquid-liquid) pump-mixer: Analyzing design parameters, flow structures and turbulence Tabib, Mandar V.; Lane, Graeme; Yang, William; et al. (pages 55-69) DOI: 10.1016/j.ces.2012.01.042
  • Numerical simulation of solid-liquid turbulent flow in a stirred tank with a two-phase explicit algebraic stress model Feng, Xin; Li, Xiangyang; Cheng, Jingcai; et al. (pages 272-284) DOI: 10.1016/j.ces.2012.07.044
  • Simultaneous investigation of macro- and micro-mixing in a static mixer
    Lehwald, Andreas; Janiga, Gabor; Thevenin, Dominique; et al. (pages 8-18) DOI: 10.1016/j.ces.2012.05.026
  • A DEM study of the mixing of particles induced by a flat blade
    Chandratilleke, G. R.; Yu, A. B.; Bridgwater, J. (pages 54-74) DOI: 10.1016/j.ces.2012.05.010
  • Effect of geometry on the mechanisms for off-bottom solids suspension in a stirred tank
    Ayranci, Inci; Machado, Marcio B.; Madej, Adam M.; et al. (pages 163-176) DOI: 10.1016/j.ces.2012.05.028
  • Large eddy simulations of mixing effects on the course of precipitation process
    Makowski, Lukasz; Orciuch, Wojciech; Baldyga, Jerzy (pages 85-94) DOI:10.1016/j.ces.2011.12.020
  • Experimental comparative mixing performance of passive micromixers with H-shaped sub-channels Nimafar, Mohammad; Viktorov, Vladimir; Martinelli, Matteo (pages 37-44) DOI: 10.1016/j.ces.2012.03.036
  • Enthalpy of mixing for the determination of mixing efficiency of microstructured mixers by isothermal heat balance calorimetry Pashkova, Aneta; Greiner, Lasse (pages 45-48) DOI:10.1016/j.ces.2012.03.029
  • Effect of impellers configuration on the gas dispersion of high-viscosity fluid using Narrow Annular Gap Unit. Part 2: numerical approach
    Mardaru, Anamaria; Souidi, Kaies; Marcati, Alain; et al. (pages 63-74) DOI:10.1016/j.ces.2012.02.056
  • In-line jet mixing of liquid-pulp-fibre suspensions: Effect of concentration and velocities
    Yenjaichon, Wisarn; Grace, John R.; Lim, C. Jim; et al. (pages 167-176) DOI:10.1016/j.ces.2012.03.012
  • Experimental study on gas-liquid-liquid macro-mixing in a stirred tank
    Cheng, Dang; Cheng, Jingcai; Li, Xiangyang; et al. (pages 256-266) DOI:10.1016/j.ces.2012.03.035
  • Impact of rheology on the mass transfer coefficient during the growth phase of Trichoderma reesei in stirred bioreactors Gabelle, J. -C.; Jourdier, E.; Licht, R. B.; et al. (pages 408-417) DOI:10.1016/j.ces.2012.03.053
  • Numerical simulation on micromixing of viscous fluids in a stirred-tank reactor
    Han, Ying; Wang, Jia-Jun; Gu, Xue-Ping; et al. (pages 9-17) DOI:10.1016/j.ces.2012.02.018
  • Investigation of drop breakage and coalescence in the liquid-liquid system with nonionic surfactants Tween 20 and Tween 80 Bak, Agata; Podgorska, Wioletta (pages 181-191) DOI: 10.1016/j.ces.2012.02.021
  • Energy efficient solids suspension in an agitated vessel-water slurry
    Wang, Steven; Boger, David V.; Wu, Jie (pages 233-243) DOI:10.1016/j.ces.2012.02.035
  • Effect of impellers configuration on the gas dispersion in high-viscosity fluid using narrow annular gap unit. Part 1: Experimental approach
    Souidi, Kaies; Mardaru, Anamaria; Roudet, Matthieu; et al. (pages 287-295) DOI: 10.1016/j.ces.2012.02.055
  • Mixing by cutting and shuffling 3D granular flow in spherical tumblers
    Juarez, Gabriel; Christov, Ivan C.; Ottino, Julio M.; et al. (pages 195-207) DOI: 10.1016/j.ces.2012.01.044
  • Impact of different confluent fluid streams viscosities on interconnected porous static mixer device
    Vicente, Jerome; Daurelle, Jean-Vincent; Brossard, Gabriel; et al. (pages 172-178) DOI: 10.1016/j.ces.2011.12.034
  • Assessing solids concentration homogeneity in Rushton-agitated slurry reactors using electrical resistance tomography (ERT) Harrison, Susan T. L.; Stevenson, Ryan; Cilliers, Johannes J. (pages 392-399) DOI: 10.1016/j.ces.2011.10.053
  • Multidimensional population balance model for the simulation of turbulent gas-liquid systems in stirred tank reactors Buffo, A.; Vanni, M.; Marchisio, D. L. (pages 31-44) DOI: 10.1016/j.ces.2011.04.042
  • Numerical simulation of turbulent flow in a baffled stirred tank with an explicit algebraic stress model Feng, Xin; Cheng, Jingcai; Li, Xiangyang; et al. (pages 30-44) DOI: 10.1016/j.ces.2011.09.055
  • Experimental study of continuous ultrasonic reactors for mixing and precipitation of nanoparticles Pohl, B.; Jamshidi, R.; Brenner, G.; et al. (pages 365-372) DOI: 10.1016/j.ces.2011.10.058
  • Age distribution and the degree of mixing in continuous flow stirred tank reactors Liu, Minye (pages 382-393) DOI:10.1016/j.ces.2011.10.062
  • Emulsion polymerization of styrene: Simulation the effects of mixed ionic and non-ionic surfactant system in the presence of coagulation
    Feiz, Samira; Navarchian, Amir H. (pages 431-439) DOI:10.1016/j.ces.2011.10.063
  • Influence of liquid back mixing on a kinetically controlled reactive distillation process
    Shah, Mayank; Kiss, Anton A.; Zondervan, Edwin; et al. (pages 184-191) DOI: 10.1016/j.ces.2011.09.027
  • Relationship between size of oil droplet generated during chemical dispersion of crude oil and energy dissipation rate: Dimensionless, scaling, and experimental analysis
    Mukherjee, Biplab; Wrenn, Brian A.; Ramachandran, Palghat (pages 432-442) DOI: 10.1016/j.ces.2011.10.001
  • CFD-PBE simulation of premixed continuous precipitation incorporating nucleation, growth and aggregation in a stirred tank with multi-class method
    Cheng, Jingcai; Yang, Chao; Mao, Zai-Sha (pages 469-480) DOI:10.1016/j.ces.2011.10.032

Chemical Engineering & Technology Vol.35(2012)

  • Mixing Analysis for a Fermentation Broth of the Fungus Beauveria bassiana under Different Hydrodynamic Conditions in a Bioreactor
    Nunez-Ramirez, Diola M.; Valencia-Lopez, Jose J.; Calderas, Fausto; et al. (pages 1954-1961) DOI: 10.1002/ceat.201200130
  • Using the Discrete Element Method for Predicting the Mixing Behavior of Gravity Blenders in Different Operation Modes Weiler, Rouven; Ripp, Marcus; Dau, Guenter; et al. (pages 1465-1472) DOI:10.1002/ceat.201100645
  • Process Intensification in Stirred Tanks
    Wu, Jie; Bon Nguyen; Lane, Graeme; et al. (pages 1125-1132) DOI:10.1002/ceat.201100712
  • Rapid Production of Biodiesel in Mesoscale Oscillatory Baffled Reactors
    Phan, Anh N.; Harvey, Adam P.; Eze, Valentine (pages 1214-1220) DOI:10.1002/ceat.201200031
  • Micromixing Characteristics in a Small-Scale Spinning Disk Reactor
    Boodhoo, Kamelia V. K.; Al-Hengari, Salah R. (pages 1229-1237) DOI:10.1002/ceat.201100695
  • Influence of Mixing System Design and Operating Parameters on Dissolution Process
    Andre, Christophe; Richard, Bruno; Le Page, Jean-Francois; et al. (pages 247-254) DOI: 10.1002/ceat.2011004

Industrial & Engineering Chemistry Research Vol.51(2012)

  • Mixing of Newtonian and Non-Newtonian Fluids in a Cylindrical Mixer Equipped with a Side-Entry Impeller (vol 51, pg 15258, 2012)
    Sossa-Echeverria, J.; Taghipour, F. (pages 16763-16763) DOI: 10.1021/ie3032845
  • Homogeneous Fluidization of Geldart D Particles in a Gas-Solid Fluidized Bed with a Frame Impeller Han, Ying; Wang, Jia-Jun; Gu, Xue-Ping; et al. (pages 16482-16487) DOI: 10.1021/ie301574q
  • Mixing of Newtonian and Non-Newtonian Fluids in a Cylindrical Mixer Equipped with a Side-Entry Impeller Sossa-Echeverria, Jaime; Taghipour, Fariborz (pages 15258-15267) DOI: 10.1021/ie300979y
  • Mixing Performance of the Novel Kar Dynamic Mixer Impeller in Small Laboratory-Scale Systems Yu, Zhao; Cope, Richard F.; Kar, Kishore K.; et al. (pages 15282-15292) DOI: 10.1021/ie3018548
  • High Pressure Mixing Rheology of Drilling Fluids
    Hermoso, J.; Jofore, B. D.; Martinez-Boza, F. J.; et al. (pages 14399-14407) DOI: 10.1021/ie301835y
  • Influence of the Top Impeller Diameter on the Gas Dispersion in a Sparged Multi-impeller Stirred Tank Bao, Yuyun; Yang, Jie; Chen, Lei; et al. (pages 12411-12420) DOI: 10.1021/ie301150b
  • Large Eddy Simulation of Turbulent Flow and Mixing Time in a Gas-Liquid Stirred Tank
    Zhang, Qinghua; Yang, Chao; Mao, Zai-Sha; et al. (pages 10124-10131) DOI:10.1021/ie202447n
  • Analysis on Laminar Chaotic Mixing Based on Configuration of Streak Lobes in an Impeller-Agitated Vessel Hashimoto, Shunsuke; Osaka, Ryota; Kawamata, Makiko (pages 6939-6947) DOI: 10.1021/ie203036n
  • Direct Simulations of Mixing of Liquids with Density and Viscosity Differences Derksen, J. J. (pages 6948-6957) DOI:10.1021/ie3000419
  • Laminar Mixed Convection in Inclined Triangular Enclosures Filled with Water Based Cu Nanofluid Rahman, M. M.; Oztop, Hakan F.; Ahsan, A.; et al. (pages 4090-4100) DOI: 10.1021/ie201235p
  • Simulation of Settling of Solid Particles Due to Sudden Impeller Stoppage
    Sardeshpande, Madhavi V.; Ranade, Vivek V. (pages 4112-4118) DOI:10.1021/ie2028987

JOURNAL OF CHEMICAL ENGINEERING OF JAPAN Vol.45 (2012)

https://www.jstage.jst.go.jp/browse/jcej/45/0/_contents

  • A Chaotic Advection Enhanced Microfluidic Split-and-Recombine Mixer for the Preparation of Chemical and Biological Probes Rajabi, Negar; Hoffmann, Marko; Bahnemann, Janina; et al. (pages 703-707)
  • Agitation Induced Mechanical Stress in Stirred Tank Bioreactors-Linking CFD Simulations to Fungal Morphology Esfandabadi, Manely Eslahpazir; Wucherpfennig, Thomas; Krull, Rainer (pages 742-748)
  • A New Evaluation Index of Mixing State of a Local Region in a Vessel in Case of Multi-Component Mixing Ogawa, Kohei (pages 469-474)
  • Modeling on Hydrogen Absorption in Tetrahydrofuran Hydrate
    Hashimoto, Shunsuke; Yamamoto, Keishi; Tsuda, Takaaki; et al. (pages 444-451)
  • A Study of Turbulence Properties of Continuous Phase in Gas-Liquid Flow in a Stirred Tank Geng, Xuan; Song, Haixia; Huang, Xiongbin; et al. (pages 315-323)
  • Operation for Fine Particle Dispersion in Shear-Thinning Fluid in a Stirred Vessel Horie, Takafumi; Sakano, Nobuhiro; Aizawa, Eiji; et al. (pages 258-264)
  • Effect of Bending Direction on Mixing Performance of Zigzag Microchannels Hashimoto, Shunsuke; Sando, Atsuki; Inoue, Yoshiro (pages 67-73)
  • Onion-Like Structure of Viscoelastic Surfactant Solution Flow Induced by 4-Blade Paddle Impeller in a Vessel Komoda, Yoshiyuki; Kobayashi, Kazuhiro; Suzuki, Hiroshi (pages 94-101)
  • Control of Crystal Size Distribution Using a mL-Scale Continuous Crystallizer Equipped with a High Speed Agitator Igarashi, Koichi; Yamanaka, Yasuhiro; Azuma, Masayuki; et al. (pages 28-33)

Chemical Engineering Research & Design(IChemE) Vol.90(2012)

  • Analysis of dilute solid-liquid suspensions in turbulent stirred tanks
    Montante, Giuseppina; Paglianti, Alessandro; Magelli, Franco (pages 1448-1456) DOI: 10.1016/j.cherd.2012.01.00
  • Effect of scale on entrainment in stirred tanks
    Kulkarni, A. L.; Patwardhan, A. W. (pages 1031-1037) DOI:10.1016/j.cherd.2011.11.012
  • Scalar mixing in a turbulent stirred tank with pitched blade turbine: Role of impeller speed perturbation Roy, Somnath; Acharya, Sumanta (pages 884-898) DOI: 10.1016/j.cherd.2011.10.009
  • Observations of solid-liquid systems in anchor agitated vessels
    Abhishek, M. S.; Choudhari, Suvarna; Muller, Frans (pages 750-756) DOI:10.1016/j.cherd.2011.09.018
  • Impeller geometry effect on crystallization kinetics of borax decahydrate in a batch cooling crystallizer Akrap, Marija; Kuzmanic, Nenad; Kardum, Jasna Prlic (pages 793-802) DOI:10.1016/j.cherd.2011.09.015
  • Improving the dynamic performance of continuous-flow mixing of pseudoplastic fluids possessing yield stress using Maxblend impeller
    Patel, Dineshkumar; Ein-Mozaffari, Farhad; Mehrvar, Mehrab (pages 514-523) DOI: 10.1016/j.cherd.2011.08.022
  • Visualization of reactive and non-reactive mixing processes in a stirred tank using planar laser induced fluorescence (PLIF) technique
    Hu, Yinyu; Wang, Wentan; Shao, Ting; et al. (pages 524-533) DOI:10.1016/j.cherd.2011.08.021
  • Rotor-stator devices: The role of shear and the stator
    Rodgers, T. L.; Cooke, M. (pages 323-327) DOI: 10.1016/j.cherd.2011.07.018
  • Experimental investigation on solid dispersion, power consumption and scale-up in moderate to dense solid-liquid suspensions Jafari, Rouzbeh; Tanguy, Philippe A.; Chaouki, Jamal (pages 201-212) DOI:10.1016/j.cherd.2011.07.009
  • On the effect of phase fraction on drop size distribution of liquid-liquid dispersions in agitated vessels (vol 88, pg 803, 2010)
    Razzaghi, Kiyanoosh; Shahraki, Farhad (pages 308-308) DOI:10.1016/j.cherd.2011.07.022

化学工学論文集 Vol.38(2012)

https://www.jstage.jst.go.jp/browse/kakoronbunshu/38/0/_contents/-char/ja/

  • 種々の形状を持った撹拌翼の浮遊化限界回転数の推算 (353-357)
    相田 真男, 庄野 厚
  • 流脈面の変形による混合の促進
    井上 義朗, 加藤 禎人, 大坂 良太, 屶網 和也, Oketch Lamek Onyango, 川又 麻起子, 橋本 俊輔 (191-202)
  • ディスクタービン付き撹拌槽における所要動力と物質移動に及ぼすスパージャーの取付け位置 の影響とスケールアップ 亀井 登, 三橋 和也, 小 田 英貴, 古川 陽輝, 加藤 禎人, 多田 豊 (203-208)
  • コンケーブタービンと大型リングスパージャーを組み合わせた気液撹拌槽における所要動力と 物質移動 古川 陽輝, 小田 英貴, 賀 成莉, 亀井 登, 加藤 禎人, 多田 豊 (209-211)
  • 種々の大型 2 枚パドル翼の撹拌所 要動力
    加藤 禎人, 小畑 あずさ, 加藤 知帆, 古川 陽輝, 多田 豊 (139-143)
  • パドル翼撹拌槽の翼位置による動力変化のレイノルズ数依存性 古川 陽輝, 加藤 禎人, 多田 豊, 高 承台, 李 泳世 (144-147)
  • 流れ方向の濃度ムラを低減する新たなコンセプトの静止型ミキサの開発 花田 敏広, 岡田 貴弘, 山田 崇, 李 勝利, 黒田 健司 (148-154)
  • 人間味を加味した乱流域での撹拌操作 小川 浩平, 黒 田 千秋, 吉川 史郎 (80-86)
  • 邪魔板挿入深さを変化させた場合のプロペラ翼の撹拌所要動力
    加藤 禎人, 中岡 梓, 古川 陽輝, 多田 豊, 高 承台, 李 泳世 (87-89)
  • 可逆反応と不可逆反応による混合時間の差異 橋本 俊輔, 西村 亮俊, 井上 義朗 (19-24)