文献リスト

AIChE Journal Vol.56(2010)

http://www.aiche.org/Publications/AIChEJournal/index.aspx

• Spectral characterization of static mixers. The S-shaped micromixer as a case study (pages 318–335)
  F. Garofalo, A. Adrover, S. Cerbelli and M. Giona
• Effects of shear and electrical properties on flow characteristics of pharmaceutical blends (pages 570–583)
  Kalyana C. Pingali, M. Silvina Tomassone and Fernando J. Muzzio
• Experimental study of the hydraulic operation of an annular centrifugal contactor with various mixing vane geometries (pages 1960–1974)
  Kent E. Wardle, Todd R. Allen, Mark H. Anderson and Ross E. Swaney
• Agitation and mobilization of thixotropic liquids (pages 2236–2247)
  J. J. Derksen
• Hysteresis in cloud heights during solid suspension in stirred tank reactor: Experiments and CFD simulations (pages 2795–2804)
  Madhavi V. Sardeshpande, Vinay A. Juvekar and Vivek V. Ranade

Canadian Journal of Chemical Engineering Vol.88(2010)

http://onlinelibrary.wiley.com/journal/10.1002/(ISSN)1939-019X/issues?year=2010

• Multi-scale and multi-fractal characteristics of instantaneous velocity signals in impinging stream mixer (pages 172–178)
  Jianwei Zhang, Xianwang Wang and Chunyu Wang
• Energy efficient high solids loading agitation for the mineral industry (pages 287–294)
  Jie Wu, Bon Nguyen and Lachlan Graham
• Mixing intensification for the mineral industry (pages 447–454)
  Jie Wu, Lachlan Graham and Bon Nguyen
• The effects of impeller speed and holdup on mean drop size in a mixer settler with spiral-type impeller (pages 329–334)
  Amir Khakpay and Hossein Abolghasemi
• Soret and thermosolutal effects on natural convection in a vertical cavity filled with a binary mixture (pages 718–727)
  Z. Alloui, A. Merabtine and P. Vasseur
• Breakup of drops around the edges of Rushton turbine (pages 912–918)
  Pramod Patil and Sanjeev Kumar

Chemical Engineering Science  Vol.65(2010)

http://www.sciencedirect.com/

• Gas–liquid mass transfer in a rotor–stator spinning disc reactor Pages 466-471
  M. Meeuwse, J. van der Schaaf, B.F.M. Kuster, J.C. Schouten
• Mixing and heat conduction in rotating tumblers Pages 1045-1054
  IsabelFigueroa, Watson L. Vargas, Joseph J. McCarthy
• Local void fraction and bubble size distributions in cold-gassed and hot-sparged stirred reactors Pages 976-984
  Yuyun Bao, Lei Chen, Zhengming Gao, Jianfeng Chen
• Polymer powders mixing part I: Mixing characterization in rotating cylinders Pages 786-795
  Amara Aït Aissa, Carl Duchesne, Denis Rodrigue
• Study of solid–liquid mixing in agitated tanks through electrical resistance tomography Pages 1374-1384
  Seyed Hosseini, Dineshkumar Patel, Farhad Ein-Mozaffari, Mehrab Mehrvar
• Hydrogenation of nitrile butadiene rubber in a multistage agitated contactor: Experiments and numerical simulation Pages 2027-2036
  Lifeng Zhang, Qinmin Pan, Garry L. Rempel
• PEPT measurements of solid–liquid flow field and spatial phase distribution in concentrated monodisperse stirred suspensions Pages 1905-1914
  Antonio Guida, Alvin W. Nienow, Mostafa Barigou
• The effects of the azimuthal position of the measurement plane on the flow parameters determined by PIV within a stirred vessel Pages 2454-2463
  Antonio Guida, Alvin W. Nienow, Mostafa Barigou
• Particle suspension in top-covered unbaffled tanks Pages 3001-3008
  A. Brucato, A. Cipollina, G. Micale, F. Scargiali, A. Tamburini
• Flow structure and the effect of macro-instabilities in a pitched-blade stirred tank Pages 3009-3024
  Somnath Roy, Sumanta Acharya, Michael D. Cloeter
• Relation between hydrodynamics and drop size distributions in pump–mix mixer Pages 3409-3426
  C. Srilatha, Vinayak V. Morab, Tushar P. Mundada, Ashwin W. Patwardhan
• Polymer powders mixing part II: Multi-component mixing dynamics using RGB color analysis Pages 3729-3738
  Amara Aït Aissa, Carl Duchesne, Denis Rodrigue
• On the solution and applicability of bivariate population balance equations for mixing in particle phase Pages 3914-3927
  Shivendra Singh Chauhan, Jayanta Chakraborty, Sanjeev Kumar
• Large-eddy simulation of the turbulent free-surface flow in an unbaffled stirred tank reactor Pages 4307-4322
  N. Lamarque, B. Zoppé, O. Lebaigue, Y. Dolias, M. Bertrand, F. Ducros
• Experiments and simulations of cohesionless particles with varying roughness in a bladed mixer Pages 4557-4571
  Brenda Remy, Thomas M. Canty, Johannes G. Khinast, Benjamin J. Glasser
• Chaotic mixing in electromagnetically controlled thermal convection of glass melt Pages 5309-5319
  Sugilal Gopalakrishnan, André Thess
• Experimental investigation and CFD simulation of liquid–solid–solid dispersion in a stirred reactor Pages 5559-5572
  Licheng Wang, Yifei Zhang, Xingang Li, Yi Zhang
• Controlled liquid antisolvent precipitation using a rapid mixing device Pages 5669-5675
  Christian Beck, Sameer V. Dalvi, Rajesh N. Dave
• Breakage of drop nucleated granules in a breakage only high shear mixer Pages 5651-5657
  Rachel M. Smith, Lian X. Liu, James D. Litster
• Optimization methodology of operation of orifice-shaped micromixer based on micro-jet concept Pages 5912-5920
  Kazuo Matsuyama, Koji Mine, Hideaki Kubo, Nobuaki Aoki, Kazuhiro Mae
• Electromagnetically induced chaotic mixing in a pipe mixer Pages 6282-6291
  Sugilal Gopalakrishnan, André Thess
• Large-scale powder mixer simulations using massively parallel GPUarchitectures Pages 6435-6442
  Charles A. Radeke, Benjamin J. Glasser, Johannes G. Khinast

Chemical Engineering & Technology  Vol.33(2010)

http://onlinelibrary.wiley.com/doi/10.1002/ceat.v33.12/issuetoc

• Experimental Study of the Mixing Time in a Jet-Mixed Gas-Liquid System (pages 327–333)
  T. Yousefi Amiri and J. S. Moghaddas
• Mixing Agglomeration in a High-Shear Mixer with a Stirred Mixing Vessel (pages 321–326)
  B. Daumann, X. Sun, H. Anlauf, S. Gerl and H. Nirschl
• Enhanced Mass Transfer in Stirred Tanks (pages 508–522)
  P. Zamankhan
• The Light Transmission Method as a New Technique for Determining Flooding Characteristics in Gas-Liquid Contactors (pages 654–657)
  E. Babalona and J. Markopoulos
• Transitional Mixing of Shear-Thinning Fluids in Vessels with Multiple Impellers (pages 1099–1106)
  S. Woziwodzki, L. Broniarz-Press and M. Ochowiak
• Development of a Computational Framework to Model the Scale-up of High-Solid-Content Polymer Latex Reactors (pages 1917–1930)
  J. Pohn, M. Heniche, L. Fradette, M. Cunningham and T. McKenna

Industrial & Engineering Chemistry Research   Vol.49(2010)

http://pubs.acs.org/loi/iecred

• Numerical Study of Isothermal Flow and Mixing Characteristics in a Cyclone-Jet Hybrid Combustor
  Cheol-Hong Hwang and Gwon Hyun Ko
  pp 2510–2520
• Study of Solid−Liquid Mixing in Agitated Tanks through Computational Fluid Dynamics Modeling
  Seyed Hosseini, Dineshkumar Patel, Farhad Ein-Mozaffari and Mehrab Mehrvar
  pp 4426–4435
• Effect of Blade Speed on Granular Flow and Mixing in a Cylindrical Mixer
  G. R. Chandratilleke, Y. C. Zhou, A. B. Yu and J. Bridgwater
  pp 5467–5478
• Gas Holdup in Gas−Liquid Stirred Tanks
  Sean G. Mueller and Milorad P. Dudukovic
  pp 10744–10750
• Liquid−Solid Mass Transfer and Reaction in a Rotor−Stator Spinning Disc Reactor
  Marco Meeuwse, Sanne Lempers, John van der Schaaf, and Jaap C. Schouten
  pp 10751–10757
• Liquid−Solid Mass Transfer in Agitated Slurry Reactors and Rotating Solid Foam Reactors
  R. Tschentscher, R. J. P. Spijkers, T. A. Nijhuis, J. van der Schaaf, and J. C. Schouten
  pp 10758–10766

JOURNAL OF CHEMICAL ENGINEERING OF JAPAN Vol.43(2010)

http://www.jstage.jst.go.jp/browse/jcej

• Intensification of Flow Characteristics in a Laminar Flow Stirred Tank Using Modified Impeller Designs 13-16
  Wei Ming Yek, Mohamed N. Noui-Mehidi and Rajarathinam Parthasarathy
• Prediction of Mixing Pattern by Using Power Number Diagram in Baffled and Unbaffled Mixing Vessels 46-51
  Yoshihito Kato, Yutaka Tada, Yasuhiro Takeda, Naoka Atsumi and Yuichiro Nagatsu
• Scale-Up Factor for Mean Drop Diameter in Batch Rotor-Stator Mixers 326-332
  Tetsu Kamiya, Meguru Kaminoyama, Kazuhiko Nishi and Ryuta Misumi
• Evaluation Method of Homogenization Effect for Different Stator Configurations of Internally Circulated Batch Rotor-Stator Mixers 355-362
  Tetsu Kamiya, Hideshi Sasaki, Yoshio Toyama, Keigo Hanyu, Meguru Kaminoyama, Kazuhiko Nishi and Ryuta Misumi
• Effect of Impeller Blade Angle on Power Consumption and Flow Pattern in Horizontal Stirred Vessel 635-640
  Tao Yang and Koji Takahashi
• Scale-Up Factor for Mean Drop Diameter in Batch Rotor–Stator Mixers with Internal Circulation 737-744
  Tetsu Kamiya, Takashi Sugawara, Hideshi Sasaki, Takao Tomita, Meguru Kaminoyama, Kazuhiko Nishi and Ryuta Misumi

Trans. IChemE (Chemical Engineering Research and Design ) Vol.88(2010)

http://www.sciencedirect.com/science/journal/02638762

• Scale-up of pump-mix mixers using CFD Pages 10-22
  C. Srilatha, Tushar P. Mundada, Ashwin W. Patwardhan
• Safety aspects in modelling and operating of batch and semibatch stirred tank chemical reactors Pages 304-319
  Aleksandra Milewska, Eugeniusz Molga
• On the effect of phase fraction on drop size distribution of liquid–liquid dispersions in agitated vessels Pages 803-808
  Kiyanoosh Razzaghi, Farhad Shahraki
• Mixing studies of non-Newtonian fluids in an anchor agitated vessel Pages 809-818
  B. Triveni, B. Vishwanadham, T. Madhavi, S. Venkateshwa
• Turbulent flow of shear-thinning liquids in stirred tanks—The effects of Reynolds number and flow index Pages 827-843
  Bart C.H. Venneker, Jos J. Derksen, Harry E.A. Van den Akker
• Change in liquid temperature behind the impeller blades with impeller speed in boiling stirred tanks Pages 1073-1077
  H. Yoshikawa, R. Fukuda, Y. Kawase
• Approximate mapping method for prediction of chaotic mixing in spatial-periodic microchannel Pages 1419-1426
  H.M. Xia, C. Shu, Y.T. Chew, Z.P. Wang
• Effect of eccentricity on transitional mixing in vessel equipped with turbine impellers Pages 1607-1614
  Szymon Woziwodzki, Lubomira Broniarz-Press, Marek Ochowiak

化学工学論文集 Vol.36(2010)

http://www.jstage.jst.go.jp/browse/kakoronbunshu/-char/ja

• 撹拌槽内における孤立混合領域の理論的解析 1-16
  井上 義朗, 伊藤 寛之, 中田 繕和, 橋本 俊輔
• 皿底円筒槽と平底円筒槽における撹拌所要動力の差異 25-29
  加藤 禎人, 多田 豊, 浦野 邦彦, 中岡 梓, 長津 雄一郎
• 乱流撹拌槽における羽根板面積が同じパドル翼の所要動力の差異 30-33
  加藤 禎人, 多田 豊, 浦野 邦彦, 服部 正寛, 長津 雄一郎, 高 承台, 李 泳世
• 流脈線ローブに基づく3次元撹拌槽内の層流混合機構の解析 355-365
  井上 義朗, 橋本 俊輔